Monterey Bay Aquarium Research Institute

 


July 19, 2011

Location: Ashes hydrothermal vent field at Axial Seamount
Latitude: 45.933° N
Longitude: 130.014° W

We have decided to release the Deep-ESP acoustically tomorrow morning, making this our final dive on the instrument. This was our last opportunity in this area to collect samples and ready the Deep-ESP for ascent. We had a very busy schedule that included picking up the homer beacon and our experiments—Gulper incubation samples and In Situ Mineral Associated Column Samplers (iSMACS)—collecting tubeworms, sulfide samples, Niskin water samples, and battery charging. Once back on deck, we continued collecting lava samples with the rock crusher.

We had a great run with the Deep-ESP. We sampled both diffuse vents and seawater in the vent field. The diffuse vent was lower in salinity and oxygen and higher in temperature than the water in the vent field itself. The Deep-ESP works kind of like your water filter, except we want what sticks on the filter: particulates and microorganisms found in seawater. Some of the material collected was analyzed on the bottom of the ocean and some was preserved for laboratory analysis. The fix that Brent Roman made the other day allowed us to resume our analysis on the seafloor. The microbial samples collected by the ESP for analysis in the lab will be used to investigate microbial communities involved in carbon cycling.

salinity chart
Differences in salinity of the two sites (vent field and diffuse flow) the ESP sampled. The diffuse flow is fresher (less saline water) and showed more variation than the surrounding seawater. The waters also differed in temperature and their chemical composition.

— Chris Preston

This was an exciting day for iSMACS. The three units were collected, and three more were deployed at the site just south of the hydrothermal vent chimney, Marshmallow. We are hoping to have colleagues pick them up next month, or find a way to get back out here next summer to collect them. The initial sampling of the nine iSMACS looks promising. Even in a few days some of the units had lots of microbial mat growth, which is evidence that diffuse hydrothermal fluid was indeed flowing through. We have a temperature record for each iSMACS unit, and we had a good variety of cool (~5°C), warm (~14°C), and even a hot (~90°C) deployment. Hopefully there was enough microbial colonization of the mineral grains to look at community differences, but we won't know that until a decent amount of lab work has happened. We are interested in determining if different minerals tend to have different microbial communities, and whether or not the microbial community is functioning differently on different minerals. We are particularly interested in carbon cycling in the vent environment, and would love to know if mineralogy affects which carbon fixation pathway is favored by the microbes.

Here iSMACS #4 is being deployed at the base of Marshmallow chimney. In the background #5 and #9 wait to be collected.
This is what the inside of the iSMACS looks like after the cap has been removed. There is also a temperature logger located below the mineral tubes.
White microbial mat on top of the mineral tubes inside one of the iSMACS. This is evidence that vent fluid was passing through the tubes themselves, which was the goal of using the iSMACS.

— Heather Olins

On some evenings following ROV dives, in addition to the lost ROV dive day Saturday, we are deploying the rock crusher. We are targeting lava flows that we can identify in the AUV maps and that have never been sampled, but where we are not likely to dive with the ROV. The rock crusher is not high-tech, but it collects adequate amounts of lava for analysis, and is a low-cost way to greatly expand our sample coverage. It is basically 317 kilograms (700 pounds) of lead weights and steel pipe, to which wax-tipped cores are bolted. It is deployed off the stern of the ship and lowered by winch to the sea floor, where it crushes the glassy surface of the lava flow on which it lands. Glass fragments stick to the wax, and when the sampler is recovered, we separate the glass by melting it away from the wax.

The rock crusher is about to be lowered to the seafloor. It is hanging from the A-frame at the stern of the ship and kept from swinging dangerously by two tag lines. Wax-tipped cones, to which our sample will stick, bristle from the base of the pipe and encircle the clump of lead weights near the top.
Volcanic glass chips (black) from the lava flow surface impacted by the rock crusher are embedded in the wax (white) on the ends of the rock crusher cones (rusty). The glass chips will be scraped off and melted away from the wax in a crock pot. Back on shore, the chips will be cleaned, made into thin sections, and analyzed for elemental and isotopic composition.

— Jenny Paduan

Tune in tomorrow for Dave Clague's visit to the outer edges of the caldera.

Previous log Next log

Leg 1
 Equipment

R/V Western Flyer

The R/V Western Flyer is a small water-plane area twin hull (SWATH) oceanographic research vessel measuring 35.6 meters long and 16.2 meters wide. It was designed and constructed for MBARI to serve as the support vessel for ROV operations. Her missions include the Monterey Bay as well as extended cruises to Hawaii, Gulf of California and the Pacific Northwest.

ROV Doc Ricketts

ROV Doc Ricketts is MBARI's next generation ROV. The system breaks new ground in providing an integrated unmanned submersible research platform, with many powerful features providing efficient, reliable and precise sampling and data collection in a wide range of missions.

Deep ESP

The ESP is a self-contained robotic laboratory that collects samples of seawater and tests these samples for different types of microorganisms, either their genetic material, such as DNA, or proteins they may secrete, such as toxins from a harmful algae bloom. Because of the immense pressure in the deep sea, MBARI's researchers had to build a special pressure housing to protect the delicate instrument. They also had to design and build an automated system to "depressurize" seawater before it could be introduced into the ESP.


Push cores

A push-core looks like a clear plastic tube with a rubber handle on one end. Just as its name implies, the push core is pushed down into loose sediment using the ROV's manipulator arm. As the sediment fills up the core, water exits out the top through one-way valves. When the core is pulled up again, these valves close, which (most of the time) keeps the sediment from sliding out of the core tube. When we bring these cores back to the surface, we typically look for living animals and organic material in the sediments.

Niskin bottles

Niskin bottles are used to collect water samples as well as the tiny bacteria and plankton in that volume. The caps at both ends are open until the bottles are tripped, when the caps snap closed.


Biobox

The box fits in a partition in the sample drawer. It is shown open, with an animal being placed into it by the ROV's manipulator. When the lid is closed, the box will hold water to protect the animals inside.


Rock crusher

This device is used to collect volcanic glass fragments from the surface of a flow. It is made of about 450kg of lead and steel and is launched over the stern of the ship on a wire. Fragments of rock that break off of the lava flow on impact are trapped in wax-tipped cones mounted around the crusher. The wax is melted in the lab to liberate the rock particles for analysis.

Benthic toolsled/
Manipulator arm/
Sample drawer with partitions

The benthic toolsled is attached to the bottom of the ROV for our geology dives. Its components are the manipulator arm and the sample drawer. The sample drawer is shown open on deck, full of rocks. Normally it is closed when the vehicle is operating and is opened only when a sample needs to be stowed. Partitions in the drawer help us keep the rocks in order. The rocks often look alike, but the conditions and chemistries of the eruptions are different so it is important that we know where each came from.

Glass suction sampler

This equipment is used to vacuum glass particles and larval animals from cracks and crevices. The carousel of small plastic jars fitted with wire mesh will be mounted in the benthic toolsled. The hose will be held by the ROV's manipulator and a suction will be drawn by the pump.

Sediment scoops

Canvas bags on a T-handle for collecting gravel or other materials that fall out of a push-core.


Temperature probe

Mounted on the D-ESP, the wire on the right is placed into the fluid emitted from a hydrothermal vent to record the temperature.

Vibracores

Vibracoring is a common technique used to obtain samples from water-saturated sediment. These corers work by attaching a motor that induces high frequency vibrations in the core liner that in turn liquefies the sediment directly around the core cutter, enabling it to pass through the sediment with little resistance.


 Crew

R/V Western Flyer

Ian Young
Master


 

George Gunther
First Mate


 

Lance Wardle
Chief Engineer


 

Andrew McKee
Second Mate


 

Paul Tucker
First Engineer


 

Olin Jordan
Oiler


 

Vincent Nunes
Bosun


 

Dan Chamberlain
Electronics Officer


 

Patrick Mitts
Steward


 

ROV Doc Ricketts

Knute Brekke
Chief ROV Pilot


 

Mark Talkovic
Senior ROV Pilot


 

Randy Prickett
Senior ROV Pilot


 

Bryan Schaefer
ROV Pilot/Technician


 

Eric Martin
ROV Pilot/Technician


 

 Research Team

Peter Girguis
Chief Scientist
Harvard University

Peter Girguis is currently a John L. Loeb Associate Professor of Natural Sciences at Harvard University, and an adjunct research engineer at MBARI. His research focuses the ecological physiology of microbes that live in extreme environments. He is particularily interested in the physiological and biochemical adaptations to life in anaerobic environments. His research lies at the intersection of biology and geochemistry, and he develops and uses a variety of tools (high-pressure systems, in situ mass spectrometers, in situ microbial fuel cells) to address the aforementioned issues. He received his B.Sc. from UCLA and his Ph.D. from the University of California Santa Barbara, where he worked with Dr. James Childress on the physiological and biochemical adaptations of deep sea hydrothermal vent tubeworms and their microbial symbionts to the vent environment. He did postdoctoral research at the Monterey Bay Aquarium Research Institute with Dr. Edward Delong on the growth and population dynamics of anaerobic methanotrophs.

David Clague
Chief Scientist
MBARI

Dave's research interests are nearly all related to the formation and degradation of oceanic volcanoes, particularly Hawaiian volcanoes, mid-ocean ridges, and isolated seamounts. Topics of interest include: compositions of mantle sources for basaltic magmas and conditions of melting; volatile and rare-gas components in basaltic magmas and their degassing history; chronostratigraphic studies of eruption sequence and evolution of lava chemistry during volcano growth; subsidence of ocean volcanoes and its related crustal flexure, plate deformation, and magmatic activity; geologic setting of hydrothermal activity; origin of isolated seamounts; and monitoring of magmatic, tectonic, and hydrothermal activity at submarine and subaerial volcanoes.

Jenny Paduan
Senior Research Technician
MBARI

Jenny works with Dave Clague in the Submarine Volcanism project. On this expedition, Jenny will be in charge of the GIS work, including use of the recently acquired, high-resolution MBARI Mapping AUV data of our dive sites. She will also stand watches in the ROV control room, help with rock and sediment sample workup and curation once the vehicle is on deck, and coordinate these cruise logs for our group's two legs of the expedition. She is now quite solidly a marine geologist, but her degrees are in biochemistry (Smith College) and biological oceanography (Oregon State University). She is thankful for the opportunities that have led her to study volcanoes, and loves being involved with the research and going to sea. She looks forward to discovering more about how the Earth works.

Bill Ussler
Senior Research Specialist
MBARI

During expeditions, Bill Ussler is primarily responsible for the operation of the custom-built, portable chemistry lab van which contains a complete analytical laboratory for the analysis of the fluids and gases contained in marine sediments. Bill studies how methane (natural gas) forms and moves within seafloor sediments.

scott jensen Scott Jensen
ESP Systems Lead Engineer
MBARI


doug pargett Doug Pargett
Deep-water Operations Lead Engineer
MBARI


chris preston Chris Preston
Senior Research Technician
MBARI


brent roman Brent Roman
System Control Lead Engineer
MBARI

Brent has been playing with computers and control systems since the late 1970s. He wrote embedded control software for video tape editing while attending the University of California at Santa Cruz, where he earned a B.S. in Computer and Information Sciences in 1985. His main technical interests are computer operating systems, languages and feedback control systems. Brent wrote most of the custom software driving the current generation of the Environmental Sample Processor. He also enjoys sailing.

Brian Dreyer
Institute of Marine Sciences
UC Santa Cruz

Brian is an isotope geologist in the Institute of Marine Sciences at UC Santa Cruz where he studies the recent magmagenesis and petrology of the Juan de Fuca Ridge. His interest in the petrology of mid-ocean ridges began during his postdoctoral fellowship with MBARI's Submarine Volcanism Group; there, he utilized uranium-series disequilibria within individual lavas of Axial Seamount to clarify eruption and petrogenetic timescales. At mid-ocean ridge systems globally, Brian is interested in a) how variability in lava morphology, geochemistry, and petrology reflect deeper mantle-melting and magmatic processes and their complex interplay with tectonism and b) improving the chronological framework of the ridge magmatic plumbing systems. Brian received his B.S. in Geology from Cal State East Bay in 2000 and PhD in Earth and Planetary Science from Washington University in St. Louis in 2007. When not on the Western Flyer this summer, Brian defends the left side of the infield for the Surfing Squirrels, MBARI's coed softball team.

Heather Olins
Graduate Student
Harvard University

Heather Olins is a graduate student at Harvard University in the Girguis Lab. Her research focuses on carbon fixation, microbe-mineral interactions, and biogeography of hydrothermal vent microbes. She is interested in the interactions of microbes with their physical environment in the deep sea, and determining the role of those interactions in global biogeochemical cycles. Heather received her B.A. and M.A. in Earth and Environmental Sciences from Wesleyan University. On this cruise Heather will be helping with the microbiology associated with the D-ESP and also deploying microbial samplers designed to investigate the impact that mineralogy has on microbial colonization and community structure in vent ecosystems.

Charles Vidoudez
Postdoctoral Fellow
Harvard University

Charles has a multidisciplinary background in plant biochemistry, biotechnology, chemical ecology, metabolomics and mass spectrometry. He obtained his Ph.D in chemical ecology at the Friedrich-Schiller University in Jena, Germany, working on developing and using metabolomics methods on diatoms. Charles's postdoctoral research focuses on combining all these techniques to better understand the deep-sea ecosystems. He currently uses and further develops in situ mass spectrometers. These instruments are a highlight of the Girguis lab and allow direct in situ characterization of the gases dissolved in the seawater, especially at hydrothermal vent sites.