Monterey Bay Aquarium Research Institute
Education
Build Your Own Remotely Operated Vehicle

Step 10


Loosen the bottom two screws on each of the toggle switches to allow a second electrical fork. The screws that should have been loosened are shown here:

Now, separate the six wires into three different pairs of two. It does not matter which two colors you pair, but write down the pairings as it will be important later.

Attach the first pair of wires to the bottom of the first switch as shown.

Attach the second pair of wires to the bottom of the second switch as shown.

Lastly, attach the third pair of wires to the bottom of the third switch.

The connections should have been made as shown:

Previous Step          Next Step

Last updated:March 22, 2011